Roller Shades

One panel of fabric that rolls up out of sight and down to exactly the coverage you want. More than a hundred fabric styles, from sheers that keep the view to blackout for a bedroom. Fitted and installed for Boise and Treasure Valley homes.

Hunter Douglas Designer Roller Shades lowered over three tall windows in a bright white living room

One Simple Shade, Dozens of Looks

A roller shade is the most straightforward window covering there is. A single panel of fabric wraps around a tube at the top of the window. Raise it and the fabric disappears into a neat roll. Lower it and you get exactly as much coverage as you want, anywhere from a few inches to the full window.

That simplicity is the point. There are no slats to dust, no cords hanging down the wall, and nothing competing with the window frame or your furniture. What changes the look completely is the fabric, and Hunter Douglas builds Designer Roller Shades in more than a hundred fabric styles. The same shade can read crisp and modern in a flat white, warm and textural in a loose weave, or disappear entirely in a color matched to your wall.

When Roller Shades Are the Right Call

Roller shades are the right pick when the fabric itself is doing the design work. If you want the window covering to be part of the room’s personality rather than a neutral background, this is the product with the widest range to choose from.

They earn their keep in bedrooms, where a room-darkening or blackout fabric shuts the light down properly. In kids’ rooms and playrooms, where a cordless lift keeps the window safe and there is nothing to break. And in living rooms, where you want to knock down afternoon glare without giving up the view.

If you care more about seeing through the shade while it is down, and you have very wide or very tall windows, ask about solar shades instead. Same idea, different fabric, built for view-through and glare control on big glass.

From Sheer to Full Blackout

Every roller fabric sits somewhere on a scale from sheer to opaque, and that choice matters more than any other decision you will make about the shade.

A sheer keeps the daylight and softens it, so the room stays bright and you can still make out the yard. A light-filtering fabric turns direct sun into an even glow and gives you real privacy after dark. A room-darkening fabric cuts most of the light. A blackout fabric stops it at the panel, which is what you want in a bedroom or a room with a television.

You do not have to pick just one. A Duolite shade puts two fabrics on the same roller, usually a sheer and a blackout, so one window handles a bright afternoon and a dark bedroom without a second shade on the wall.

Close view of the woven texture in a Hunter Douglas Designer Roller Shade fabric

How It Opens and Closes

This is the part most people never think about until they live with it, and it is worth two minutes of your time during the consultation. Hunter Douglas offers several lift systems on Designer Roller Shades and they feel completely different day to day.

Cordless means no cord at all. You push the bottom bar up or pull it down by hand. It is the cleanest look and the safest choice around children and pets.

LiteRise works the same way by hand and holds its position anywhere you leave it.

Custom Clutch uses a continuous loop on one side. It takes the least effort on a large, heavy shade, which is why it is the common pick for tall windows.

PowerView automation is the motorized option. Shades move on a schedule, from a remote, or from your phone, and they can run in groups so a whole wall of windows moves together. It is the right answer for anything you cannot easily reach, and for west-facing glass that needs to close before the afternoon sun hits. See motorized window coverings for how that works.

Finishing the Top and the Bottom

A roller shade has a visible roll at the top unless you cover it, and that small decision is what separates a shade that looks built-in from one that looks added on.

Left open, the fabric rolls off the back of the tube and keeps the profile as slim as possible. A square cassette hides the roll behind a clean squared-off cover, wrapped in your shade fabric or finished in one of nine hardware colors. A fascia is a metal valance in three or four inch heights for a more contemporary, architectural look. A fabric valance gives you a soft upholstered band across the top. And if the window is being built or remodeled, the whole roll can recess into a pocket in the ceiling so nothing shows at all.

At the bottom you choose between a round or a flat bar, wrapped in the shade fabric or left in a plain finish. It is a small detail that reads every time the shade is down.

Justin walks you through these in your own room, against your own trim. They are much easier to decide in person than from a list.

Where They Work in a Boise Home

Treasure Valley homes throw two problems at a window covering: hard afternoon sun on the west and south sides in summer, and cold glass in January. Roller shades handle both, and the fabric choice is what does it.

Roller shades lowered over three windows in a home office with a desk and laptop

Home offices. A light-filtering fabric kills the glare on a screen without turning the room into a cave, so you can work through the afternoon with the lights off.

Roller shades filtering daylight in a bedroom with two large windows

Bedrooms and kids’ rooms. Room-darkening or blackout fabric for sleep, cordless lift for safety, and a fabric that stands up to being pulled on every day.

Questions People Ask About Roller Shades

Can Roller Shades Fully Block Light?

Yes. Choose a room-darkening or blackout fabric and the shade blocks the great majority of light through the panel itself, which makes it a strong pick for bedrooms and media rooms. A little light will still come around the edges of the fabric, so if total darkness is the goal, ask about an outside mount during the consultation.

Are Roller Shades Safe Around Children?

Choose a cordless or motorized lift and there is no cord on the window at all, which removes the hazard entirely. This is the standard recommendation for any room a child sleeps or plays in.

How Do I Clean Them?

Dust them with a soft cloth or vacuum them on a low setting with a brush attachment. Because the fabric is one flat panel with no slats, there is far less to collect dust than on a blind. We give you care instructions for your specific fabric when we install.

Can One Shade Cover a Very Wide Window?

Often yes, and where a single shade would be too wide we can run several on a shared headrail so they read as one continuous line across the window. We measure and work that out on site.

Can I See the Fabric Before I Decide?

That is the whole point of the in-home consultation. Justin brings the Hunter Douglas samples to your house so you see the fabric on your own window, in your own light. A shade that looks perfect under store lighting can read completely differently in a west-facing room at five in the afternoon. Our showroom at 2615 W Main St in Boise is open too if you would rather come to us. Call ahead so we can be sure to be there.

See Roller Shades in Your Own Light

Justin brings the samples to you, measures your windows, and gives you a straight recommendation. The in-home consultation is free and there is no pressure to buy.

Or call (208) 808-8676